Type EX Stainless Steel Capillary Thermostat

Attentions:
1, the user must be based on the characteristics of their products,the required temperature control, put forward the order type and specification.
2, Install the thermostat, heat pipe as far as possible the whole stick close to the surface temperature control, in order to achieve the purpose of accurate temperature control.
3, The installation must not be a heat pipe pressure deformation, so as not to affect its performance.
4, Don't make electricity gas and electricity material in a thermostat or contaminated thermostat surface to avoid affect      the electrical insulating performance.
5, Switch box is that the electrical appliances ceramic part to handle gently and avoid damage.
6, The bending radius of capillary is not less than 5mm.