We’re committed to sharing work results, company updates, key developments, and staffing announcements with you.
We'll keep you updated on our progress, company news, timely developments, and personnel changes.
You'll receive regular updates on our performance, organizational news, ongoing developments, and leadership appointments.
We’ll share performance outcomes, important news, timely project updates, and organizational changes with you.
Stay informed about our achievements, company happenings, real-time progress, and team updates.
Wet bathrooms punish heating elements at the terminals, not the heating zone. How NBRAM seals, gold plates and dielectric-tests 12V to 24V DC toilet heating elements for 30 to 40 degC seat warmth.
Cold room evaporators run wet and sub-zero for hours, then need a clean defrost termination. Here is what defrost thermostat duty demands on the coil, from -40°C sensing to 16A switching load.
How frost, condensate and constant temperature swings wear out refrigeration switches, and how NBRAM defrost thermostats handle it: -40C to 90C range, ±1C accuracy, 16A/250V AC switching.
How 100 kHz switching loads transformer layer insulation, and what mica bobbins do about it: 25-40 kV/mm dielectric strength, -50C to 850C continuous duty and tight flange tolerances.
NBRAM high temperature resistant mica tube is wound from layered mica with an inorganic binder: -269C to 1100C continuous service, 2-200 mm OD, up to 25 kV/mm dielectric strength.
NBRAM snap action thermostats switch on a bimetallic disc that inverts in milliseconds instead of creeping open: 1,000,000-cycle life, -40C to 300C range, 16 A tested at 20 A continuous.
