We’re committed to sharing work results, company updates, key developments, and staffing announcements with you.
We'll keep you updated on our progress, company news, timely developments, and personnel changes.
You'll receive regular updates on our performance, organizational news, ongoing developments, and leadership appointments.
We’ll share performance outcomes, important news, timely project updates, and organizational changes with you.
Stay informed about our achievements, company happenings, real-time progress, and team updates.
Braking and bleeder duty punishes a power resistor with fast thermal cycles, not average wattage. NBRAM cordierite wire wound resistors cover 5W to 500W, 0.1ohm to 100kohm and -55C to +300C.
Busbar joints run hot while carrying voltage, so the spacer has to do two jobs. NBRAM Mica-Ceramic Composite Parts work from -60°C to 950°C, hold 15-25 kV/mm and resist electrical tracking.
Rewinding a 13.8 kV motor puts the groundwall under starting surges, thermal cycling and slot vibration. NBRAM mica tape for HV windings: 155C (F), over 35 kV/mm, partial discharge under 5 pC.
KSD 9700 Series bimetal thermostats from NBRAM: 0°C to 250°C, ±2°C accuracy, 16A/250V AC, automatic reset. Multi-point calibration, helium-tested seals and thermal aging on every unit.
A stamped mica support holds heater element spacing at 850°C. We hold thickness to ±0.05mm and 18-22 kV/mm dielectric strength after thermal cycling, and inspect every stamp for micro-fractures.
A folded M-profile tubular heater wraps the workpiece with three contact points instead of one hot line, giving 40-60% more effective heating length in the same footprint and no cold ends.
